Aguilar On board bass preamp OBP 3SK/PP
Aguilar On board bass preamp OBP 3SK/PP
[Aguilar OBP 3SK/PP aktívna elektronika]
Aguilar OBP-3SK/PP On board Preamp 1set
OBP-3SK/PP: Includes stacked Treble/Bass pot and
separate Mid pot. Mid pot is push/pull for Midrange frequency selection
3 BAND, BOOST/CUT / 9 OR 18 VOLT ON BOARD PREAMP
The OBP-3 is Aguilar’s most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a push/pull pot OR mini-toggle for midrange frequency selection.
Specification :
Bass control: plus/minus 18 dB @ 40 Hz
Mid control: plus/minus 16 dB @ 400Hz or 800 Hz.
User selectable frequency center
Treble control: plus/minus 16 dB @ 6.5 KHz
Input impedance: 1 meg ohm
Output impedance: 100 ohm 9 or 18 volts
operation
Distortion: .019 into 10k ohm load
Noise: -95 dBm unweighted
Battery life: 324 hours
Wire lead length: 6.50 inches
Low noise discrete FET input stage, center detent 50 K
linear pots,with a dual concentric pot available
Dimensions: 0.98″W x 0.98″L x 0.59″D